MisterSkeeter Assembly

Welcome, brave bug-battler! You’re just a few twists and turns away from assembling your MisterSkeeter—the ultimate wingman in the war against winged pests. With this gadget in your corner, the only thing buzzing around will be your sense of victory. Before you get tangled in the nuts and bolts (well more like a couple tubes and gadgets), be sure to bug out on two other essentials: our Operation Guide (because even heroes need a playbook) and the DIY Pesticides Guide (your recipe for pest-free perfection). Together, these guides and your freshly assembled MisterSkeeter will leave mosquitoes swatting at straws.

Step 1: Prepare Tools & Materials for Assembly

Your package includes four individually wrapped parts that assemble to complete your MisterSkeeter. Unpack all parts and lay them out on a flat surface. Verify that all components (packs 1-4) are included.

• Pack #1: Canister and hand pump 
  
• Pack #2: Spray trigger with white tube and cap 
  
• Pack #3: MisterSkeeter clamp, misting nozzle, and supply line 
  
• Pack #4: trigger assembly holder with two fastening screws 

Required tools: Small Phillips screwdriver. 

---

Step 2: Assemble the Canister Tank & Trigger

Reference Pack #1 (canister and hand pump) and Pack #2 (spray trigger, white tube, and cap). Insert the white tube into the canister and fasten the black screw cap tightly to prevent leakage.

---

Step 3: Connect the Clamp and Nozzle

From Pack #3, take the clamp, misting nozzle, and supply line. Loosen the compression coupling on the spray trigger assembly, insert the male end of the supply line fully into the coupling, slide the clamp and nozzle into position, then tighten the coupling securely to hold all parts in place and prevent leaks.

---

Step 4: Attach the Spray Trigger Holder 

Open Pack #4 and assemble the two pieces of the spray trigger holder. Use the provided screws to secure the holder to the tank handle.